Complete Bathroom with a Roll-in Shower.

In this beautiful ezaccess bathroom was created with the homeowner's mother in mind. Many suggestions were made by the professional designer. Most were incorporated to accomplish these beautiful results.

  • Both deco bands and finishing edges were in 3" x 6" tumble travertine.
  • The floor tile was 2” x 2” tumble travertine, the color was Latte.
  • The accessories install were the shampoo caddies.
  • Also installed was a custom-built tumbled travertine shampoo niche.
  • Grout used on this project was Earth.
  • Both of the single handle faucets are in brushed nickel.
  • Final installation of the showerheads and faucet trimmings.
  • The two showerheads were installed( fixed and hand-held).
  • The locations of the grab bars were located in positions where the client could maneuver independently.
  • The ceiling and walls in the bathroom were tape and floated, primed, and painted ( two coats).
  • The wall mounted mirror was replaced with an oval pivot type wall-mounted mirror.
  • The commode installed it an ADA approved unit.
  • The fold-down shower bench can be positioned up and out of the way when not in use.
  • We removed the ceramic tiled tub enclosure and the backerboard.
  • The steel baked on enamel bathtub was also removed.
  • The foundation was recessed to convert the bathtub drain to a shower drain line.
  • The shower faucet was removed along with all the plumbing.
  • The new plumbing was raised and the two new faucets were installed. Notice the position of the shower faucets.
  • The walls were reinforced with 2 x 4s as needed.
  • The shower pan installation was next.
  • Reinforcements for the grab bars were installed.
  • Installation of the water and mold proof backerboard was next.
  • Followed by tape and floating with thinset mortar and fiberglass tape.
  • The tile was then installed. The tile installed was 12" x 12 ” tumbled travertine.
  • The band and the decos were in a 3 " x 6" tumbled travertine.